...feet ( 100 m ) ( CAT5 cable not included ) Order toll - free in the U.S . : Call 877 - 877 - BBOX ( outside U.S . call 724 - 746 - 5500 ) Customer FREE technical support 24 hours a day , 7 days a week : Call 724 - 746 - 5500 or fax 724 - 746 - 074...

...that is , in strict accordance with the manufacturer’s instructions , may cause inter ference to radio communication . It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in S...

...Automatic Input Cable Length Up to 20 ft . Output Cable Length Up to 20 ft . USB Signal Type USB 1.1 and 1.0 Keyboard and Mouse only . USB 2.0 for CAC connection ( Only in models with CAC ) Type B KVS4 - 1002D / KVS4 - 2002D ( 2 ) USB Type B...

...unplug the Video - Cable to the Remote Monitor ( Dualhead devices : BOTH Monitors ! ) • Open the Local Unit like described above • Unplug Jumper JP1 and plug it to Position JP3 ( Dualhead devices : jumper setting on BOTH PCB’s ! ) • Switch on t...

MARCH 1999 RMK19B RMK23B RMK24B RMK19C RMK23C RMK24C ™ R4 ServSwitch Rackmount Kits for Slimline and Full - Size Models ™ ™ You can use your R4 ServSwitch Rackmount Kit to mount an - R4 version ServSwitch or ServSwitch Ultra ( our SW720 [ - R4 ] ser...

...installed and used according to the instructions in this manual , together with the specified cables and the maximum cable length < 3m , the Units : ACS1009A - MM , ACS2209A - MM ACS4001A - MM , ACS4201A - MM ACS1009A - SM , ACS2209A - SM ACS4001...

...Automatic Input Cable Length Up to 20 ft . Output Cable Length Up to 20 ft . USB Signal Type USB 1.1 and 1.0 Keyboard and Mouse only . USB 2.0 for CAC connection . Type A to B ( 4 ) USB Type - B for keyboard / mouse connection ( 4 ) USB Type...

...DB9 RS - 232 to RJ - 45 cable , connect a terminal or terminal emulator to the Gigabit Managed Ethernet Switch to access the command - line interface . Š Š Attach the RJ - 45 serial port on the switch’s front panel to connect to the switch for conso...

...unplug the Video - Cable to the Remote Monitor ( Dualhead devices : BOTH Monitors ! ) • Open the Local Unit like described above • Unplug Jumper JP1 and plug it to Position JP3 ( Dualhead devices : jumper setting on BOTH PCB’s ! ) • Switch on t...

...that is , in strict accordance with the manufacturer’s instructions , may cause inter­ference to radio communication . It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in S...